Dishwashers

Dishwasher Repair in Totnes

Dishwashers that will not drain, clean, heat or start, repaired in your home. All Appliance Care covers Totnes and the surrounding area.

An engineer carrying out dishwashers repairs in a customer's home
Enquiry

Tell us what you need

01Local knowledge

Dishwashers, Totnes homes

Homes in Totnes

Know the home, know the fault

Working in Totnes, a market town at the head of the River Dart estuary, means visiting properties of all ages. The historic wealth here is visible in the numerous merchants' houses built during the sixteenth and seventeenth centuries. It is said this area has more listed buildings per person than any other town. Historic homes usually have uneven floors or quirky kitchen layouts, which can make pulling out a built-in dishwasher tricky. The town also draws tourists interested in its status as a transition town, meaning some properties serve as holiday lets where appliances get heavy use from different guests. Families are also drawn to the alternative private schools providing primary and secondary education, keeping domestic kitchens busy. A dishwasher that will not drain usually has a blockage in the filter or a jammed drain pump, leaving dirty water sitting in the base at the end of a cycle. When dishes come out wet or cold, the heating element or its wiring has usually failed, stopping the machine from reaching the correct temperature. Poor cleaning results are sometimes caused by blocked spray arms or a faulty wash motor that cannot push water around the cabinet with enough pressure. Leaks can develop from worn door seals or split internal hoses, while error codes might point to a control board issue preventing the cycle from starting. When visiting a property in Bridgetown or the surrounding area, we look at draining faults, heating issues, leaks, and machines that refuse to start. We check spray arms, door seals, and error codes to find out why the appliance is not cleaning properly. We repair appliances in customers' homes, including washing machines, tumble dryers, fridges, freezers, and electric ovens. We do not work on gas cookers or any gas appliance.

02What we look at

Every dishwasher fault, diagnosed in your home

01

Draining faults and water left in the base

02

Poor cleaning results and spray arm problems

03

Heating faults and dishes left wet

04

Leaks and door seal problems

05

Error codes and machines that will not start

04Questions

Dishwashers in Totnes: your questions

Not answered here? Tell us the make, the model and what the appliance is doing.

Call 01752 922765

Water left in the base usually points to a draining fault. The drain filter might be blocked by food debris, or the drain pump could be jammed by a broken piece of glass. Sometimes, the waste hose is kinked behind the machine. We look at these components to find the blockage.

Dishes remain wet and cold when the appliance has a heating fault. The heating element might have failed, or a thermostat could be preventing the water from reaching the correct temperature. Without hot water, the machine cannot clean properly, and the final drying phase will not work.

Leaks from the front are usually caused by a damaged or worn door seal. Over time, the rubber gasket can perish or split, allowing water to escape during the wash cycle. A blocked lower spray arm can also force a wave of water directly against the seal, causing a leak.

Call now