Tumble Dryers
Tumble Dryer Repair in Totnes
Dryers that will not heat, turn or finish a cycle, repaired in your home. All Appliance Care covers Totnes and the surrounding area.
01Local knowledge
Tumble Dryers, Totnes homes
Homes in Totnes
Know the home, know the fault
With a high number of listed buildings per person, many older residences have restricted utility spaces. Fitting a tumble dryer into a historic property can mean relying on a condenser or heat pump model, as venting a traditional exhaust hose through an old wall is not always an option. Families managing school uniforms and visitors drawn by the transition town status rely on these machines to keep laundry moving when outdoor drying is impractical. When a dryer runs but does not heat, the issue is usually a tripped thermostat or a failed heating element. Machines that stop mid-cycle or will not start at all might have a faulty door switch or a problem with the control board. If the drum will not turn while the motor hums, the drive belt has likely snapped or slipped off the tension pulley. Condenser and water container faults can prevent the appliance from removing moisture, leaving clothes damp at the end of a cycle. Noisy running points to worn support rollers, a degraded belt, or failing motor bearings. Whether your machine is in a historic building or a property out towards Puddavine, we repair appliances in customers' homes. We look at dryers that will not heat, turn, or finish a cycle, bringing the tools needed to dismantle the cabinet and test the internal components. Please note that while we repair electric ovens, cookers, and hobs, we do not work on gas cookers or any gas appliance.
02What we look at
Every tumble dryer fault, diagnosed in your home
01
Dryers that run but do not heat
02
Drums that will not turn
03
Dryers that stop mid-cycle or will not start
04
Condenser and water container faults
05
Noisy running
03Other appliances
Something else playing up in Totnes?
04Questions
Tumble Dryers in Totnes: your questions
Not answered here? Tell us the make, the model and what the appliance is doing.
Call 01752 922765A dryer that turns but stays cold usually has a fault in the heating circuit. This could be a blown thermal fuse, a tripped thermostat, or a broken heating element. In condenser models, a blocked filter can cause the machine to overheat and cut the heat to protect the appliance, requiring the safety thermostats to be reset or replaced.
If the motor makes a humming noise but the drum remains still, the drive belt has likely snapped or stretched. A seized drum bearing or worn support rollers can also physically jam the drum. Alternatively, a failing motor capacitor might not provide enough power to start the rotation, meaning the motor cannot turn the heavy load of wet laundry.
When clothes remain wet in a condenser dryer, the machine is failing to extract or drain the moisture. The condenser unit itself might be blocked with lint, preventing air circulation. The water pump that moves condensation to the collection drawer can also fail, or the float switch might be stuck, which stops the drying cycle before the laundry is ready.
Nearby