Wine Coolers
Wine Cooler Repair in Ashburton
Wine coolers and chillers that will not hold temperature, repaired in your home. All Appliance Care covers Ashburton and the surrounding area.
01Local knowledge
Wine Coolers, Ashburton homes
Homes in Ashburton
Know the home, know the fault
As the largest town in the national park, the area has a mix of kitchen layouts. A wine cooler is a sensitive appliance, and whether it sits in a quiet residential kitchen or a property near the culinary academy in the north of the town, it requires good airflow to function. When built into cabinets without adequate ventilation, the compressor has to work harder to reject heat, which can lead to cooling failures. When a chiller stops holding its set temperature, the issue might be a failing compressor, a blocked condenser, or a faulty temperature sensor. Dual-zone models have separate compartments for different wine types, and it is possible for one zone to fail while the other continues to work. This usually points to a stuck damper or a broken evaporator fan in that specific section. Condensation and misting on the glass door suggest that the door seal has split or lost its magnetic grip, allowing warm room air to meet the cold interior. Fan and control faults can also stop the unit from circulating cold air properly. During a visit to your home, we look at coolers not holding the set temperature, dual-zone models with one zone failing, condensation and misting on the door, and fan and control faults. We also cover nearby places like Buckfastleigh, repairing electric cooking appliances, washing machines, and refrigeration units, though we do not work on gas appliances.
02What we look at
Every wine cooler fault, diagnosed in your home
01
Coolers not holding the set temperature
02
Dual-zone models with one zone failing
03
Condensation and misting on the door
04
Fan and control faults
03Other appliances
Something else playing up in Ashburton?
04Questions
Wine Coolers in Ashburton: your questions
Not answered here? Tell us the make, the model and what the appliance is doing.
Call 01752 922765Condensation inside the cabinet usually happens when warm room air enters the appliance. This is caused by a split or worn magnetic door seal that no longer closes flush against the frame. It can also happen if the door hinges have dropped, preventing a tight seal and allowing moisture to enter and condense on the cold interior walls.
Dual-zone models use a single compressor but direct cold air to separate compartments using internal fans and dampers. If one zone fails while the other holds its temperature, the fault is likely an evaporator fan motor that has stopped spinning or a motorised damper stuck in the closed position, blocking the flow of chilled air to that specific section.
A loud buzzing or vibrating noise can indicate an issue with the compressor or the cooling fans. If the condenser fan blade is obstructed by dust or debris, it will vibrate heavily as it turns. Alternatively, the compressor mountings may have worn down, causing the motor to rattle against the metal chassis when it runs to cool the cabinet.
Nearby